Loading ...
Loading ...
Loading ...
A
WAmING
● All ranges can tip.
● Injury could result.
. M the Anti-tip device
packed with the range.
. See the Instigation
Instructions.
● The Anti-tip device must
remain engaged.
StabilityDeviceInstillation Instructions
1.Ontherightsideofthecutoutorinstallation 3. If mountingintowoodflooring,drill3/32”holesas
locationmeasure5ti”fromthebackwallforward marked.If mountingintoconcrete,usea masonry
andmarka point.Repeatontheleft-handside,then drillbitanddrill3/16”holes.Insertplasticanchors
drawa straightlinebetweenthepoints.
intoconcreteholes.Positionthebracketandmount
2. If installing the unit against cabinet(s): Placethe
itusingthesuppliedscrews.
insideedge-ofthebrac~et(s)againstthe”lineandthe 4.Leveltherangeusingthelevelinglegs.Therange
endofthebracket(s)againstthecabinetside.See mustbeleveltoassureuniformcookingandbaking.
theillustrationbelow.Marktheholelocations. A levelshouldbeplacedonan ovenrackorontop
Anti-fip Bracket Location Wth Cabinets
oftherangetolev~ltheunit.Verifythattheleveling
11,11
legs are extended at least 1/4”and are engaged with
the anti-tip bracket.
Installingtheunitwithoutcabinets:Position the
range as it would be installed. Draw a reference
line on the floor from front to back along one side
of the range. Place the inside edge of the
brackets(s) flush with the line drawn in Step 1 and
the end of the bracket(s) flush with the line you
havejust drawn. Mark the hole locations.
Anti-~p Bracket Location Wthout Cabinets
RearWall
M
I
Anti-~pBracket
I
I
I
i
i
I ~ ReferenceUneFor ~ I
I
RangePlacement
I
5.me rangemaynowbepushedintoposition.
Removethestoragedrawerandcheckthattheleg
hasengagedtheanti-tipbracket.If it hasnot,the
bracketmustberelocatedtoensureengagementof
thelevelinglegintothebracket.
If therangeismovedforcleaning,
A
servicing or any reason, be sure the
anti-tip device is re-engaged properly
when the range is replaced. Failure to
take this precaution could result in
tipping of the range and cause injury.
Loading ...
Loading ...
Loading ...