Loading ...
Loading ...
Loading ...
ENGLISH
8
Figure 25
Use the cut-out template (e) to mark the aperture on
the drywall panel. The six protrusions correspond
to the outer dimensions of the louvre fascia and are
provided to indicate necessary clearance. Do not
mark round these protrusions, but rather along the
dotted lines that cross them (Figure 25).
At this point, you may apply exible mastic to the
face of the subwoofer cabinet to prevent rattles
against the drywall panel.
Fit the frywall panels to the studs (Figure 26) and
apply the nal skim coat.
Paint the wall at this stage and, if desired, paint the
louvre fascia moulding (b) to match. The part will
take all normal wall paints.
Attach the louvre (c) to the front of the opening
and secure it to the louvre frame using the two M3
machine screws (i) through the two bars. Do not
over-tighten. There should be slight bending tension
in the two louvre bars, but the surround should not
be distorted or the fascia will not t correctly.
Clip the fascia (b) to the louvre (c) (Figure 27).
Figure 26
Figure 27
e
i
b
c
x 2
i
Loading ...
Loading ...
Loading ...