Loading ...
Loading ...
Loading ...
V-ZUG Ltd
V-ZUG Ltd, Industriestrasse 66, CH-6302 Zug
[email protected], www.vzug.com
Planning aid
International collection
Laundry room appliances
J001062-R16
30.04.19
21
Positioning in a niche
If a tumble dryer is installed in a niche, a 130° door stop must be provided (article no. W54086).
If the niche is fitted with a door, it must be ensured that the door is left open for the duration of the process. The niche door
and the appliance door must be hinged on the same side.
The condensed water hose must not be crushed between the rear of the appliance and the building wall.
The heat given off from the rear of the appliance must be conducted out of the niche. By means of 2 ventilation grilles
P33002 or a ventilation cross-section of min. 400 cm
2
in the niche cover ensure there is a supply of fresh air via the connec-
tion opening.
400 cm²
≥1710
≥50
≥605
≥
605
≥100
≥100
605
50
► Centre the installation plate in the niche.
► Niche width: ≥605mm
► Distance to the back wall: ≥50mm
► Cut-out for connections (left or right): ≥100×100mm
► Niche height: ≥1710mm
► Ventilation cross-section: ≥400cm
2
Variant 1 Variant 2
A
C
B
A
E
B
1
00
1
00
A
D
Variant Positioning Niche depth A Installation offset for installation plate D
1 Niche front B and tumble dryer door C are flush ≥605 mm 50 mm
2 Niche front B and washing machine door E are flush ≥645 mm 83 mm
Loading ...
Loading ...
Loading ...