Loading ...
Loading ...
Loading ...
VD (E3.1) 10/2020 page 33/179
4.6 Electrical connection
The chambers are supplied ready for connection. They come with an IEC connector plug.
Model
Power plug of the
power cable
Nominal voltage
±
10% at the
indicated power frequency
Current
type
Chamber
fuse
VD 23
IEC connector plug
(grounded)
230 V at 50 Hz
230 V at 60 Hz
1N~ 2 x 6,3 A
VD 56
IEC connector plug
(grounded)
230 V at 50 Hz
230 V at 60 Hz
1N~ 2 x 8 A
VD 115
IEC connector plug
(grounded)
230 V at 50 Hz
230 V at 60 Hz
1N~ 2 x 10 A
VD 23-UL
NEMA 5-15P 100-120 V at 60 Hz 1N~ 10 A
VD 56-UL
NEMA 5-20P 100-120 V at 60 Hz 1N~ 2 x 16 A
VD 115-UL
NEMA 5-20P 100-120 V at 60 Hz 1N~ 2 x 20 A
• The domestic socket must also provide a protective conductor. Make sure that the connection of the
protective conductor of the domestic installations to the chamber’s protective conductor meets the
latest technology. The protective conductors of the socket and plug must be compatible!
DANGER
Electrical hazard due to missing protective conductor connection.
Deadly electric shock.
Make sure that the chamber’s power plug and the power socket match and
securely connect the electrical protective conductors of the chamber and the house
installation.
• Prior to connection and start-up, check the power supply voltage. Compare the values to the specified
data located on the chamber’s type plate (chamber front behind the door, bottom left-hand, see chap.
1.6).
NOTICE
Danger of incorrect power supply voltage due to improper connection.
Damage to the chamber.
Check the power supply voltage before connection and start-up.
Compare the power supply voltage with the data indicated on the type plate.
• When connecting, please observe the regulations specified by the local electricity supply company and
as well as the VDE directives (for Germany). We recommend the use of a residual current circuit
breaker.
• After connecting the power cable to connection (1), lead it through the strain relief (1a).
• Only use original connection cables from BINDER according to the above specification
• Pollution degree (acc. to IEC 61010-1): 2
• Over-voltage category (acc. to IEC 61010-1): II
See also electrical data (chap. 27.3).
To completely separate the chamber from the power supply, you must disconnect the power
plug. Install the chamber in a way that the power plug is easily accessible and can be easily
pulled in case of danger or to turn off the chamber.
Loading ...
Loading ...
Loading ...