Loading ...
Loading ...
Loading ...
31
EN
Troubleshooting
Troubleshooting
Error codes
An error code is displayed if an error occurs while setting the crank length or doing calibrations.
Code Description of error Data (radial) Data (tangential)
1 Parameter deviation (mass of load is 0) - -
2 Insufîš¿cient battery power - -
3 Failed to calibrate zero point (tangential and radial) 1: Error
0: Normal
1: Error
0: Normal
4 The zero point calibration is very different from the desired
value.
Multiple of detected value of force Multiple of detected value of force
5 Not used - -
6 Large disruption detected due to vibration during calibration Degree of instability of detected
value of force
Degree of instability of detected
value of force
7 Calibration with load was done before high accuracy zero point
calibration
- -
8 Exceeded measurement limit during load calibration Multiple of detected value of force Multiple of detected value of force
Loading ...
Loading ...
Loading ...