Loading ...
Loading ...
Loading ...
10
EN
Installing the Magnets
Installing the Magnets
3
Select a type of magnet according to the following table.
Crank Position to measure Measured results Type of magnet
Right
Distance between chainring adapter and chain stay
Over 4.5 mm
Under 9.1 mm
Patch type
Over 1.5 mm Arm type
(*1)
Left
Distance between left transmitter and chain stay
Over 6 mm
Under 13.7 mm
Patch type
Over 3 mm Arm type
(*2)
*1 The chainring adapter and the arm type magnet must be installed so the distance between them is under 5.0 mm.
*2 The left transmitter and the arm type magnet must be installed so the distance between them is under 9.6 mm.
The patch type magnet may not be installable, depending on the shape of the chain stay. If this is the case, install the patch type magnet •
on the seat tube, or choose the arm type magnet.
If you install the patch type magnet on the seat tube, conrm that the position and results of the measurement are as shown below.•
Right side: Distance between chainring adapter and seat tube: Between 4.5 mm and 9.1 mm
-
Left side: Distance between left transmitter and seat tube: Between 6 mm and 13.7 mm
-
Loading ...
Loading ...
Loading ...