Loading ...
Loading ...
Loading ...
8
18. Remove drum from dryer by grasping the drum belt
and front of drum and slide drum out of cabinet front.
IMPORTANT: Note position of drum belt, front and rear
orientation for reassembly. See Figure 18.
NOTE: When removing drum from cabinet be sure not to hit
the CCU and bracket assembly knocking it from its hanging
position. Continue to “Determining Gas Valve Style” –
“Changing the Orice.”
FIGURE 18
FRONT
REAR
DRUM BELT
SPRING CLIPS
FIGURE 1
1. Lift dryer top. Use a putty knife to press against the left
and right spring clips to release them from the top. Gently
lean dryer top toward the wall so as not to damage the
dryer top or wall. See Figure 1.
SECTION 3 – 7 TO 7.6 CUBIC FOOT MODELS WITH 29"
CABINET, FULL FRONT PANEL, AND REAR CONSOLE
FIGURE 3
HANGER
FRONT
PANEL
3. Disconnect the door switch connector from the harness
connector. See Figure 2.
4. Lift the front panel, unhook it from the bottom two
hangers and remove the panel. See Figure 3.
FIGURE 2
DOOR SWITCH CONNECTOR
CABINET FRONT
SCREW
2. Remove two (2) hex head screws from the cabinet front
panel. See Figure 2.
Loading ...
Loading ...
Loading ...