Loading ...
Loading ...
Loading ...
Instructions
54
• Do not use rough or abrasive
materials or sharp metal scrapers.
• Never use the oven door to lever
the appliance into place when
fitting.
• Avoid exerting too much pressure
on the oven door when open.
• Do not use the handle to lift or
move the appliance.
Installation
• THIS APPLIANCE MUST NOT BE
INSTALLED IN BOATS OR
CARAVANS.
• Position the appliance into the
cabinet cut-out with the help of a
second person.
• Do not install the appliance in
potentially explosive
environments.
• Do not install the appliance in
closed environments without
sufficient air exchange.
• Do not install the appliance in
areas exposed to direct sunlight
or close to heat sources (ovens,
hobs etc.).
• To avoid potential overheating, the
appliance must not be installed
behind a decorative door or a
panel.
• Have the electrical connection
performed by authorised technical
personnel.
• The appliance must be connected
to earth in compliance with
electrical system safety standards.
• Use cables withstanding a
temperature of at least 90 °C.
• The tightening torque of the screws
of the terminal supply wires must
be 1.5 - 2 Nm.
For this appliance
• Do not damage the refrigeration
circuit (if this is accessible).
• Follow applicable legislation on the
consumption of raw foodstuffs. Raw
fish should be frozen to -20°C
and held at that temperature for at
least 24 hours.
• Carefully clean the parts of the
appliance which come into direct
or indirect contact with foodstuffs
to prevent any kind of
contamination.
• Use food-safe detergents.
• Do not use flammable or harmful
products.
Loading ...
Loading ...
Loading ...