Loading ...
Loading ...
Loading ...
Use
63
EN
3.2 Preliminary operations
1. Remove any protective film from the
outside or inside of the appliance,
including accessories.
2. Remove any labels (apart from the
technical data plate) from the
accessories and inside of the appliance.
3. Remove and wash all the appliance
accessories (see 4 Cleaning and
maintenance).
4. To remove any manufacturing residue,
clean the inside of the appliance
thoroughly with a soft cloth and neutral,
non-abrasive detergent (see “Cleaning
the inside of the appliance.”).
5. You must set the current time in order to
start using the appliance (see “First use”).
3.3 Using the accessories
Racks
The racks must be inserted into the side
guides until they come to a complete stop.
• The mechanical safety locks that prevent
the racks from being removed
accidentally must face downwards and
towards the back of the appliance.
Temperature probe
Insert the probe into the food before starting
the blast chill by probe cycle or hot
functions.
• The temperature probe must be inserted
into the middle of the food without going
through it.
• For different sized pieces or irregular
foodstuffs, the probe should be placed in
the largest piece/thickest area.
When you have finished using the probe,
clean it with a soft cloth and warm water,
dry it carefully and return it to its housing.
Sharp point
Injury hazard
• Handle the probe with care and do not
touch its tip.
Insert the probe transversely,
ensuring at least 3/4 of its length is
inside the foodstuff.
Loading ...
Loading ...
Loading ...