Loading ...
Loading ...
Loading ...
42 43
/ Multi-Shot Mode
CAPTURING BURST PHOTOS
1. Select Burst mode:
a. Press the
Power/Mode button [
] repeatedly until you get
to Multi-Shot mode.
b. Press the Settings/Tag button [
] to open the settings menu.
c. Press the Shutter/Select button [ ] repeatedly until you
get to Burst.
d. Press the Settings/Tag button [
] to close the settings
menu. The Burst icon [
] appears in the upper le on your
camera status screen.
2. Press the Shutter/Select button [
]. The camera status lights
flash and the camera beeps multiple times.
See Rate in this section for options available for Burst photos.
/ Multi-Shot Mode
CAPTURING TIME LAPSE OR NIGHT LAPSE PHOTOS
1. Select the desired multi-shot capture mode (Time Lapse or
Night Lapse):
a. Press the
Power/Mode button [
] repeatedly until you get
to Multi-Shot mode.
b. Press the Settings/Tag button [
] to open the settings menu.
c. Press the Shutter/Select button [ ] repeatedly until you get
to the desired capture mode (Time Lapse or Night Lapse).
d. Press the Settings/Tag button [
] to close the settings
menu. The icon for the selected capture mode appears in the
upper le on your camera status screen.
2. Press the Shutter/Select button [
]. The camera initiates
countdown and the camera status lights flash each time a photo
is captured.
3. To stop capturing, press the Shutter/Select button [
]. The
camera status lights flash three times and the camera beeps
three times.
PRO TIP: When the camera is off and QuikCapture is enabled, you
can turn the camera on and immediately begin capturing Time Lapse
photos just by pressing and holding the Shutter/Select button [
].
Press again to stop recording and power off the camera. For details,
see Setup Mode.
Loading ...
Loading ...
Loading ...