Loading ...
Loading ...
Loading ...
Electrical connection
74
Disconnecting from the mains
Danger of electric shock.
After disconnection, ensure the ap-
pliance cannot be switched back on
by mistake.
To disconnect the appliance from the
mains power supply, do one of the fol-
lowing depending on installation:
Safety fuses
Completely remove fuses
Automatic circuit breakers
Press the (red) button until the middle
(black) button springs out.
Built-in circuit breakers
Circuit breakers, type B or C: switch
the on-off switch from 1 (on) to 0 (off).
Residual current device (RCD)
Switch the main switch from 1 (on) to
0 (off) or press the test button.
Mains connection cable
The hob must be connected to the elec-
trical supply with a special connection
cable, type H 05 VV-F (PVC insulated)
with a suitable diameter.
Please see wiring diagram for connec-
tion. (N.B. This appliance is supplied
single phase only in the UK / AUS / NZ).
See the data plate on the hob for the
correct voltage and frequency.
Connecting the mains cable
Danger of electrical shock.
The mains connection cable must be
fitted by a suitably qualified and
competent person in accordance
with current local and national safety
regulations.
The wires in the mains cable are col-
oured in accordance with the follow-
ing code:
Green/yellow = earth
Blue = neutral
Brown = live
The earth lead must be connected to
the point marked .
If the mains cable needs to be replaced
it must be replaced with a special con-
nection cable, type H05VV-F (PVC-in-
sulated), available from Miele.
The connection data is quoted on the
data plate.
Loading ...
Loading ...
Loading ...