Loading ...
Loading ...
Loading ...
Flush-fitted hobs
68
Installation notes
Flush fit hobs are only suitable for in-
stallation in natural stone (granite,
marble), tiled or solid wood worktops.
Certain models are suitable for build-
ing into glass worktops - please see
advice under "Building-in dimen-
sions". When using a worktop made
from any other material, please check
first with the worktop manufacturer
that it is suitable for installing a flush
fit hob.
The internal width of the base unit
must be at least as wide as the in-
ternal cut-out width for the hob (see
"Building-in dimensions"). This is to
ensure that the casing can be easily
removed for maintenance. If the un-
derside of the hob is not freely ac-
cessible after installation, any sealant
used to plug the gaps around the ap-
pliance must be removed to enable
the hob to be lifted out of the cut-out
should this be necessary.
The hob can be installed
– in a suitable cut-out in a natural stone
worktop.
– in a suitable cut-out in a tiled or solid
wood worktop or a glass worktop
with a wooden support frame. The
frame must be provided on site, and
is not supplied with the appliance.
Loading ...
Loading ...
Loading ...