Loading ...
Loading ...
Loading ...
Miele@home / Con@ctivity
57
If you want
– To sign the hob on to the
Miele@home system, first prepare
the signing on procedure on the mas-
ter appliance.
– To sign the hob on to Con@ctivity,
you must first sign the cooker hood
on.
To access programming mode
With the hob switched off, touch
the and sensors at the same
time until the symbol and ap-
pear in the timer display.
After a few seconds : (Programme
01) will flash alternately with :
(Code) in the timer display.
Signing on the hob
While : is visible in the display,
touch the sensor repeatedly un-
til: (Programme P:10) appears.
: appears in the display.
Touch the sensor repeatedly un-
til: appears in the display.
The signing on process will begin and a
scrolling bar will appear in the display.
The signing on process takes a few
minutes. As soon as it is completed
successfully,: will light up in the
display.
If the signing on process is not com-
pleted successfully, repeat the pro-
cess.
While : is visible in the display,
touch the sensor until the indicat-
ors go out to save the setting.
Finish signing on the cooker hood/
master appliance (see the relevant in-
structions).
Signing off the hob
If you want to sign the hob off from
Miele@home, first carry out the sign-
ing off procedure on the master appli-
ance.
While : is visible in the display,
touch the sensor repeatedly un-
til: (Programme P:10) appears.
: appears in the display.
Touch the sensor repeatedly un-
til: appears in the display.
The signing off process will begin and a
scrolling bar will appear in the display.
The signing off process takes a few
minutes. As soon as it is completed
successfully,: will appear in the dis-
play.
If the signing off process is not com-
pleted successfully, repeat the pro-
cess.
While : is visible in the display,
touch the sensor until the indicat-
ors go out to save the setting.
Loading ...
Loading ...
Loading ...