Loading ...
Loading ...
Loading ...
Problem solving guide
55
Problem Cause and remedy
The food in the pan
does not heat up when
the Auto heat-up func-
tion is switched on.
A large amount of food is being heated up.
Start cooking at the highest power level and then
turn down to a lower one manually later on.
The pan is not conducting heat properly.
Use a different pot or pan which conducts heat
properly.
An operating noise can
be heard after the appli-
ance has been switched
off.
The fan will continue running until the appliance has
cooled down. It will then switch itself off automatic-
ally.
alternating with
flashes in the
timer display.
The hob is incorrectly connected.
Contact Miele. The hob must be connected to the
mains according to the wiring diagram.
1 and a number, e.g. 1-0
flashes alternately with
a 3 digit number in the
timer display.
Cooking zone fault
Interrupt the power supply to the hob for approx. 1
minute.
If the problem persists after power has been re-
stored, please contact Miele.
alternating with a
number flashes
in the timer dis-
play.
The overheating protection mechanism has been ac-
tivated.
See "Overheating protection".
, or
The fan is blocked or defective.
Make sure it has not been blocked by something
like a fork. Remove the cause of the blockage.
If this fault code continues to appear in the dis-
play, contact Miele Service.
and other numbers
There is a fault in the electronic module.
Interrupt the power supply to the hob for approx. 1
minute.
If the problem persists after power has been re-
stored, please contact Miele.
Loading ...
Loading ...
Loading ...