Loading ...
Loading ...
Loading ...
13
CLEANING AND MAINTENANCE
Always clean the hand blender thoroughly after using.
Any other servicing should be performed by an authorized service
representative.
HAND BLENDER
Detach the charger handle from the motor body before cleaning. Remove the
shaft with the blade from the motor body. The shaft with the blade can be
cleaned by hand in hot water with a mild detergent. It is not necessary to
remove the blade from the shaft. Do not use abrasive cleansers that could
scratch the surface.
Clean the motor body and the charger handle with a sponge or damp cloth
only. Do not use abrasive cleansers that could scratch the surface.
The mixing/measuring beaker can be cleaned in the dishwasher (upper rack) or
by hand in hot water with a mild detergent.
Never immerse the motor body or charger handle in water.
CHOPPER/GRINDER ATTACHMENT
To simplify cleaning, rinse the prep bowl, cover and blade immediately after
use, so that food won’t dry onto them. Wash blade ring, plastic sheath, and
prep bowl in warm soapy water. Rinse and dry. Wipe the underside of the
chopper/grinder cover with a sponge or damp cloth to remove any food. Do
not submerge the cover in water or place in the dishwasher. Wash the
blade carefully. Avoid leaving it in soapy water where it may disappear from
sight.
If you have a dishwasher, you can wash the prep bowl and blade assembly on
the upper shelf. Insert the prep bowl upside down. Put the blade in the cutlery
basket. Unload the dishwasher carefully to avoid contact with the sharp blade.
Wipe the top cover with a damp sponge or cloth. Dry it immediately.
The chopper/grinder attachment is intended for HOUSEHOLD USE ONLY. Any
service, other than cleaning and normal user maintenance, should be performed
by an authorized Cuisinart Service Representative.
WHISK ATTACHMENT
To clean your whisk attachment, simply release the attachment
from the motor body housing. Once the whisk is removed, detach the metal
whisk from the gearbox by pulling pieces apart. To clean the gearbox, simply
wipe with a damp cloth. To clean the metal whisk, wash with warm, soapy
water or place in the dishwasher. Do not submerge the gearbox in water or
any other liquid. Any other servicing should be performed by an authorized
service representative.
DISPOSAL/RECYCLING
OF BATTERIES
This product uses four nickel-cadmium rechargeable and recyclable batteries.
At the end of the batteries’ useful life, they should be recycled. These batteries
must not be incinerated or composted.
Nickel-cadmium batteries should not be put in municipal waste systems.
Contact your local waste collection agency for proper recycling and disposal
information for your area.
Please do not attempt to dismantle the charger handle to replace these
batteries on your own. Damage could result to the unit.
When it is time to replace and/or recycle the batteries, or to receive additional
instructions for disposing of old batteries, call toll-free 1-800-726-0190 to order
a new charger handle which will include the four new batteries. Or send the
charger handle to Cuisinart, 150 Milford Road, E. Windsor, NJ 08520.
Loading ...
Loading ...
Loading ...