Loading ...
Loading ...
Loading ...
en Troubleshooting
66
Fault Cause troubleshooting
The spin result is not satis-
factory. The laundry is too
wet/too damp.
Less Ironing is activated.
▶
Select the programmes that are
suitable for the type of fabric.
→"Programmes", Page29
The unbalanced load detec-
tion system has interrupted
the spin cycle because the
laundry is unevenly distrib-
uted.
▶
Redistribute the laundry in the
drum.
Note:Where possible, mix large and
small items in the drum. Different sized
items of laundry distribute themselves
better during the spin cycle.
▶
Start the Spin programme.
Detergent residue on the
damp washing.
Detergents may contain wa-
ter-insoluble substances that
deposit on the laundry.
▶
Start the Rinse/Freshen Up pro-
gramme.
Unsuitable detergent added
to the dispenser of the intelli-
gent dosing system.
1. Check whether the detergent used
is suitable.
→"Detergents and care products",
Page40
2. Drain the dispenser.
→"Cleaning the detergent drawer",
Page53
3. Clean the dispenser.
4. Refill the dispenser.
→"Filling the dispenser", Page45
Basic dosage is not correctly
adjusted.
▶
If intelligent dosing is activated, re-
duce the "basic dosage"
→Page46.
Detergent residue on the dry
laundry.
Detergents may contain wa-
ter-insoluble substances that
deposit on the laundry.
▶
Brush out the laundry after washing
and drying.
Unsuitable detergent added
to the dispenser of the intelli-
gent dosing system.
1. Check whether the detergent used
is suitable.
→"Detergents and care products",
Page40
2. Drain the dispenser.
→"Cleaning the detergent drawer",
Page53
3. Clean the dispenser.
4. Refill the dispenser.
→"Filling the dispenser", Page45
Basic dosage is not correctly
adjusted.
▶
If intelligent dosing is activated, re-
duce the "basic dosage"
→Page46.
Loading ...
Loading ...
Loading ...