Loading ...
Loading ...
Loading ...
en Basic operation
42
It may take a few seconds for the
appliance to switch on.
a The appliance performs an audible
function test in the detergent
drawer.
→"Noise", Page65
Note:The drum is lit up after the
door is opened and closed and once
the programme has started. The light
goes out automatically.
Setting a programme
1. Set the programme selector to the
required "programme" →Page29.
2. If necessary, "adjust the pro-
gramme settings" →Page42.
Setting additional programmes
1. Set the Additional Programs pro-
gramme.
2. Press to call up the sub-menu
for additional programmes.
3. Select a programme.
4. Press Main menu to call up the
main menu.
5. Adjust the programme settings if
required.
6. Start the programme.
Adjusting the programme set-
tings
Depending on the programme and
programme progress, you can adjust
or activate/deactivate the settings.
Note:Overview of all programme set-
tings:
→"Buttons", Page26
Requirement:A programme has
been set.
▶
Adjust the programme settings.
→"Operating logic", Page22
The programme settings are not
saved permanently for the pro-
gramme.
Note:The setting is saved if you ac-
tivate or deactivate the intelligent
dosing system.
Adjusting additional programme
settings
1. Press Options to call up the sub-
menu for the additional pro-
gramme settings.
2. Select the programme settings.
The programme settings are not
saved permanently for the pro-
gramme.
3. Press Options to call up the main
menu.
Saving the programme set-
tings
1. Set the Memory programme.
2. Press to call up the sub-menu
for the memory programmes.
Loading ...
Loading ...
Loading ...