Loading ...
Loading ...
Loading ...
Specifications
57
APPENDIX
3
* Please be aware that some specifications may change
without notice.
The machine’s software can be updated using USB flash
drive.
When an update program is available on the Brother
support website at “ http://s.brother/cphan
”, please
download the file(s) following the instructions on the
website and steps listed below.
When using the wireless function, the update mark is
displayed on the wireless LAN key.
: Updated software is available on our website. Update
the software.
: No updated software is available.
Version information can be checked from the settings
screen. (page 13)
a
Turn on the machine while pressing and holding
(Presser foot lifter button).
The following screen appears.
b
Insert the USB flash drive into the USB port on the
machine.
c
Press .
• Do not turn off the machine during the update.
When updating is finished, the completion message
appears.
d
Remove the USB flash drive, and turn the machine off
and on again.
Specifications
Item Specification
Dimensions of
machine
Approx. 480 mm (W) × 250 mm (D) × 300
mm (H)
(Approx. 18-7/8 inches (W) × 9-7/8 inches
(D) × 11-7/8 inches (H))
Weight of machine For 888-G60: Approx. 8.6 kg
(Approx. 20 lb)
For 888-G70/G72: Approx. 8.7 kg
(Approx. 20 lb)
Dimensions of
machine with
embroidery unit
attached
Approx. 693 mm (W) × 421 mm (D)× 300
mm (H)
(Approx. 27-3/8 inches (W) × 16-5/8
inches (D) × 11-7/8 inches (H))
Weight of machine
with embroidery unit
attached
For 888-G60: Approx. 12.1 kg
(Approx. 27 lb)
For 888-G70/G72: Approx. 12.2 kg
(Approx. 27 lb)
Sewing speed 70 to 850 stitches per minute
Updating Your Machine’s Software
Note
• When using USB flash drive to update the
software, check that no data other than the update
file is saved on the USB flash drive being used
before starting to update.
Memo
• When the machine's software is updated, saved
embroidery patterns will not be erased.
Note
• Save only the update file on the USB media.
Loading ...
Loading ...
Loading ...