User Manual Sunny Health & Fitness SF-B1876 Magnetic Belt Drive Premium Indoor Cycling Bike

• User Manual - (English)

• Spec Sheet (web) - (English)

User Manual Magnetic Belt Drive Premium Indoor Cycling Bike Sunny Health & Fitness SF-B1876

IMPORTANT SAFETY INFORMATION

1. Before starting any exercise program, you should consult your physician to determine if you have any medical or physical conditions that could put your health and safety at risk or prevent you from using the equipment properly. Your physician’s advice is essential if you are taking medication that affects your heart rate, blood pressure, or cholesterol level.

2. Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop exercising if you experience any of the following symptoms: pain, tightness in your chest, irregular heartbeat, shortness of breath, lightheadedness, dizziness, or feelings of nausea. If you do experience any of these conditions, you should consult your physician before continuing with your exercise program.

3. Keep children and pets away from the equipment. The equipment is designed for adult use only.

4. Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet. To ensure safety, the equipment should have at least 2 feet (60 CM) of free space all around it.

5. Ensure that all nuts and bolts are securely tightened before using the equipment. The safety of the equipment can only be maintained if it is regularly examined for damage and/or wear and tear.

6. Always use the equipment as indicated. If you find any defective components while assembling or checking the equipment, or if you hear any unusual noises coming from the equipment during exercise, discontinue use of the equipment immediately and do not use until the problem has been rectified.

7. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may become entangled in the equipment.

8. Do not place fingers or objects into the moving parts of the equipment.

9. The maximum weight capacity of this unit is 300 pounds (135 KG).

10.The equipment is not suitable for therapeutic use.

11.To avoid bodily injury and/or damage to the product or property, proper lifting and moving are required.

12.Your product is intended for use in cool and dry conditions. You should avoid storage in extreme cold, hot or damp areas as this may lead to corrosion and other related problems.

13.This equipment is designed for indoor and home use only; it is not intended for commercial use.

BATTERY INSTALLATION AND REPLACEMENT

BATTERY INSTALLATION:

1. Take out 2 AAA batteries from the plastic bag for manual.
2. Press the buckle of battery cover on the back of the Computer (No. 81), then remove battery cover.
3. Install 2 AAA batteries into the battery case on the back of the Computer (No. 81). Pay attention to the battery + and – ends before installing.
4. Press the buckle of battery cover, then put the battery cover back to the back of the Computer

The installation is complete!

BATTERY REPLACEMENT:

1. Press the buckle of battery cover on the back of the Computer (No. 81), then remove battery cover.
2. Remove the 2 old AAA batteries in the battery case and install 2 new AAA batteries into the battery case on the back of the Computer (No. 81). Pay attention to the battery + and – ends before installing.
3. Press the buckle of battery cover, then put the battery cover back to the back of the Computer

The replacement is complete!

MAINTENANCE INSTRUCTIONS

DAILY MAINTENANCE

After each exercise session, wipe down all the equipment: seat, frame, and handlebars. Pay special attention to the seat post, handlebar post, and belt/chain guard. Sweat is very corrosive and may cause problems that require parts replacement later.

1. Get on the bike and engage the drive train.
2. Pay attention to any vibrations felt through the pedals. If you feel any vibrations, you may need to tighten the pedals, bottom bracket, or adjust the drive belt/chain tension.
3. Use a wrench to tighten the pedals until they are secure.

MONTHLY MAINTENANCE

1. Check if all hardware is secure, such as: water bottle holder, flywheel nuts, belt/chain guard bolts, brake caliper lock nuts, and brake caliper tension rod nuts.
2. Inspect the brake tension rod for signs of wear such as missing threads. Clean and lubricate the brake tension rod.
3. Clean and lubricate the seat post, handlebar post and seat slider. Remove any buildup of foreign material.

WEEKLY MAINTENANCE

1. Inspect moving parts and tighten the hardware.
2. Inspect pull pin frame fittings to make sure the fittings are secured. Loose frame fittings may strip out threads over time and cause extensive damage.
3. Clean and lubricate pop pin assemblies. Pull on the pin and spray a small amount of lubricant onto the shaft.
4. Tighten the seat hardware to make sure the seat is level and centered.
5. Brush and treat the resistance pads. Remove any foreign material that may have collected on the pads. Spray the pads with silicone lubricant. This helps to reduce noise from friction between the pads and the flywheel.
6. Visually inspect the bottom bracket, toe clips and toe straps. If any of them are loose or disconnected, attach and tighten.