Loading ...
Loading ...
Loading ...
23
Press the "SET" key to enter parameter setting mode. After entering the settings menu, the
parameter number 00 flashes and you can press the "UP" and "DOWN" keys to select the
parameter code that you want to set. To access the parameter program press "ENT" key to
enter the parameter editing state, at which point the value of the parameter flashes. Adjusts the
value of the parameter through the "UP" and "DOWN" buttons, and finally press "ENT" to press
the key, complete the edit of the parameter, and return to the parameter selection state.
Parameters Number
Parameter Name Description
Set options
00
01
Exit
Load Working
Mode
02 Output Frequency
[00] ESC
[01] SOL
[01] UtI
（Default）
[01] SBU
[02] 50.0
[02] 60.0
(Default)
Exit the settings menu
Solar energy provides power to
the loads as priority. If solar
energy is not enough to power all
connected loads, battery energy
will supply power the loads at the
same time.
Utility provides power to the loads
only when any one condition
happens:
- Solar energy is not available
- Battery voltage drops to
low-level set-point in Program 04
Utility will provide power to the
loads as priority. Solar and battery
energy will provide power to the
loads only when utility power is
not available
The output frequency can be set
through this menu. By default, the
value should be 60Hz
Solar energy provides power to
the loads as priority. If solar
energy is not enough to power all
connected loads, battery energy
will supply power to the loads at
the same time.
Utility provides power to the loads
only when battery voltage drops to
low-level set-point in Program 04
LCD Programmable Features
03
AC Input
Voltage Range
[03] APL
[03] UPS
(Default)
By default, the input voltage range
is the same, 90~140VAC
By default, the input voltage range
is the same, 90~140VAC
Loading ...
Loading ...
Loading ...