Loading ...
Loading ...
Loading ...
12
Wiring
NOTE
CAUTION
CAUTION
WARNING
WARNING
The Renogy Solar Inverter is suitable for 48V battery banks systems ONLY. Not
following the minimum DC requirement may cause irreversible damage to the unit.
The solar inverter components at the AC input/output, battery components, and
PV components will produce high energy output. Make sure to connect the
appropriate component to the appropriate labeled terminals.
Be careful of the positive and negative poles. Reversing the poles may cause
permanent damage to the inverter.
After the power switch is switched off, there is still high energy inside the solar
inverter, do not open or touch the internal device, wait for the capacitance to be
put off after the relevant operation.
Locate the power button on the solar
inverter and make sure the solar inverter
main power is turned off
Remove the terminal cover by unscrewing
the appropriate terminals located on the
face of the solar inverter
The input terminals of the inverters have large capacitors connected to them.
Once a positive and negative wire are connected to the terminals, it will
complete the circuit, and commence drawing a heavy current momentarily. As
a result, there may be a sparking occurring even if the inverter is in the off
position. To minimize sparking, it is recommended that the user have the
appropriate size wire feeding into the solar inverters and/or install an external
fuse leading into the inverter.
ON
OFF
Loading ...
Loading ...
Loading ...