Loading ...
Loading ...
Loading ...
En 44
Connecting audio devices (such as CD players)
Connect audio devices such as CD players, MD players, and a turntable to the unit.
Depending on the audio output jacks available on your audio device, choose one of the
following connections.
• The following explanation is based on the assumption that you have not changed the “Input Assignment”
setting (p.148) in the “Setup” menu. As necessary, you can assign the COAXIAL (c, d, e) and OPTICAL
(a, b, f) jacks to another input source.
• If you make more than one audio connection for one input source, an audio signal played back on the unit
will be determined according to the “Audio Select” setting (p.117) in the “Option” menu.
If you select the input source by pressing AV 1–4, AUDIO 1–3 or PHONO on the remote
control, the audio played back on the audio device will be output from the unit.
Audio output jacks on audio device Audio output jacks on the unit
Digital coaxial
AV 1–2 (COAXIAL)
AUDIO 3 (COAXIAL)
Digital optical
AV 3 (OPTICAL)
AUDIO 1–2 (OPTICAL)
Analog stereo
AV 1–4 (AUDIO)
AUDIO 1–3 (AUDIO)
Turntable (PHONO) PHONO
When connecting a turntable
• The PHONO jack of the unit is compatible with an MM cartridge. To connect a turntable with a
low-output MC cartridge, use a boosting transformer.
• Connecting the turntable to the GND terminal of the unit may reduce noise in the signal.
HDMI OUT
ARC
(ZONE OUT)
1
2
(1 BD/DVD)
AV 1 AV 2
R
L
AV 1 AV 2 AV 3 AV 4
AUDIO 1 AUDIO 2 AUDIO 3
(2 TV)
(1 BD/DVD)
OPTICAL
4
OPTICAL
3
COAXIAL COAXIAL
2
COAXIAL
1
PHONO
GND
FM
75Ω
ANTENNA
(
4 RADIO
)
OPTICAL
ZONE OUT/PRE OUT
ZONE 2/
F. PRESENCE
ZONE 3/
R. PRESENCE
SURROUND
R
5
6
L
AM
FRONT
Y
A
V
A
MONITOR OUT/
ZONE OUT
Y
(HDCP2.2)
R
L
PHONO
GND
R
L
COAXIAL
OPTICAL
R
L
PHONO
GND
C C
L
R
L
R
O O
L
R
L
R
Audio output
(any of digital coaxial, digital optical,
analog stereo)
Any of AV 1–4, AUDIO 1–3
(COAXIAL, OPTICAL, AUDIO) jacks
The unit
(rear)
Audio device
PHONO jacks
Audio output
(PHONO)
Turntable
Ground lead
1 2 3 4 5 6 7 8 9 10 11
Loading ...
Loading ...
Loading ...