Loading ...
Loading ...
Loading ...
En 156
Removing the limitation on HDMI video output
(MONITOR CHECK)
The unit automatically detects resolutions supported by a TV connected to the HDMI
OUT jack.
Disable the monitor check function if you want to specify a resolution in “Resolution”
(p.139) when the unit cannot detect the TV’s resolution or when you want to specify a
different resolution than the detected resolution.
Settings
• Reset to “YES” if the unit becomes inoperable because video from the unit cannot be displayed on the TV
after “MONITOR CHECK” has been set to “SKIP”.
Selecting the HDMI 4K signal format (4K MODE)
Select the format of signals input/output at the unit when HDMI 4K (60 Hz/50Hz)
compatible TV and playback device are connected to the unit.
Settings
• When “MODE 1” is selected, use a high-speed HDMI cable that supports 18 Gbps.
Backing up/recovering the settings (RECOV./BACKUP)
Creates backup of the settings of the unit, or recovers the settings from the backup.
■ Backup/recovery procedure
1
Press STRAIGHT repeatedly to select “BACKUP” or “RECOVERY” and press INFO
to start the process.
Choices
Restoring the default settings (INITIALIZE)
Restores the default settings for the unit.
Choices
YES
Enables the monitor check function. (Outputs video signals with a
resolution supported by the TV only.)
SKIP
Disables the monitor check function. (Outputs video signals with a
specified resolution regardless of compatibility with the TV.)
MODE 1
Inputs/outputs 4K (60 Hz/50 Hz) signals in 4:4:4, 4:2:2 or 4:2:0 format.
(4:2:0 format only for VIDEO AUX [HDMI IN] jack)
Depending on the connected devices or HDMI cables, videos may not
be displayed correctly. In this case, select “MODE 2”.
MODE 2
Inputs/outputs 4K (60 Hz/50 Hz) signals in 4:2:0 format.
SBLRPL SBRSBRPR
SW1
SL
SW2SW
SR
FPL
CLR
FPR
YES
MONITOR CHECK
SBLRPL SBRSBRPR
SW1
SL
SW2SW
SR
FPL
CLR
FPR
MODE 2
4K MODE
BACKUP Creates backup of the settings of the unit in the internal memory.
RECOVERY
Recovers the settings of the unit from the backup (available only when
backup has been created).
Note
• Do not turn off the unit during the recovery process. Otherwise, the settings may not be restored
correctly.
• The backup does not contain user information (such as user accounts and passwords).
VIDEO Restores the default settings for video configurations.
ALL Restores the default settings for the unit.
CANCEL Does not perform an initialization.
SBLRPL SBRSBRPR
SW1
SL
SW2SW
SR
FPL
CLR
FPR
BACKUP
RECOV./BACKUP
SBLRPL SBRSB RPR
SW1
SL
SW2SW
SR
FPL
CLR
FPR
CANCEL
INITIALIZE
Loading ...
Loading ...
Loading ...