Loading ...
Loading ...
Loading ...
En 154
Configure the system settings of the unit while viewing the front display.
1
Set the unit to standby mode.
2
While holding down STRAIGHT on the front panel, press MAIN ZONE
z
.
3
Press PROGRAM to select an item.
4
Press STRAIGHT to select a setting.
5
Press MAIN ZONE z to set the unit to standby mode and turn it on
again.
The new settings take effect.
ADVANCED SETUP menu items
• Default settings are underlined.
Configuring the system settings
(ADVANCED SETUP menu)
MAIN ZONE z STRAIGHT
PROGRAM
Item Function Page
SPEAKER IMP. Changes the speaker impedance setting. 155
REMOTE SENSOR Turns on/off of the remote control sensor on the main unit. 155
REMOTE CON AMP Selects the unit’s remote control ID. 155
TV FORMAT Switches the video signal type. 155
MONITOR CHECK Removes the limitation on HDMI video output. 156
4K MODE Selects the HDMI 4K (60 Hz/50 Hz) signal format. 156
RECOV./BACKUP
Creates backup of the settings of the unit, or recovers the settings
from the backup.
156
INITIALIZE Restores the default settings. 156
FIRM UPDATE Updates the firmware. 157
VERSION Checks the version of firmware currently installed on the unit. 157
Loading ...
Loading ...
Loading ...