Loading ...
Loading ...
Loading ...
En 26
■ Setting the speaker impedance
Under its default settings, the unit is configured for 8-ohm speakers. When using a
6-ohm speaker for any channel, set the speaker impedance to “6 MIN”. In this case,
you can also use 4-ohm speakers as the front speakers.
1
Before connecting speakers, connect the power cable to an AC wall
outlet.
2
While holding down STRAIGHT on the front panel, press
MAIN ZONE z.
3
Check that “SPEAKER IMP.” is displayed on the front display.
4
Press STRAIGHT to select “6 MIN”.
5
Press MAIN ZONE z to set the unit to standby mode and remove the
power cable from the AC wall outlet.
You are now ready to connect the speakers.
■ Connecting speakers
Connect the speakers placed in your room to the unit.
Speakers to be connected
If you have nine speakers, use two of them as surround back speakers (*1) or rear
presence speakers (*2). If you have seven speakers, use two of them as surround back
speakers (*3) or front presence speakers (*4). If you have five speakers, use two of
them as surround speakers (*5) or front presence speakers (*6).
• You can also connect up to 2 subwoofers (with built-in amplifier) to the unit. When using 2 subwoofers,
configure the “Layout (Subwoofer)” setting (p.134) in the “Setup” menu after connecting the power cable to
an AC wall outlet.
• To use an external power amplifier (Hi-Fi amplifier, etc.) to enhance speaker output, see “Connecting an
external power amplifier” (p.37).
MAIN ZONE z STRAIGHT
SBLRPL SBRSB RPR
SW1
SL
SW2SW
SR
FPL
CLR
FPR
8¬MIN
SPEAKER IMP.
Caution
• Remove the unit’s power cable from an AC wall outlet and turn off the subwoofer before connecting the
speakers.
• Ensure that the core wires of the speaker cable do not touch one another or come into contact with the
unit’s metal parts. Doing so may damage the unit or the speakers. If the speaker cables short circuit,
“Check SP Wires” will appear on the front display when the unit is turned on.
Room Speaker type Abbr.
Speaker system
(the number of channels)
Power Amp
Assign
(p.131)
9+2 9 7 5 2
Main zone
Front (L) 1 ●●●●●
Basic (default)
Front (R) 2 ●●●●●
Center 3 ●●●●
Surround (L) 4 ●●●*5
Surround (R) 5 ●●●*5
Surround back (L) 6 ● *1 *3
Surround back (R) 7 ● *1 *3
Front presence (L) E ●●*4 *6
Front presence (R) R ●●*4 *6
Rear presence (L) T ● *2
Rear presence (R) Y ● *2
1 2 3 4 5 6 7 8 9 10 11
Loading ...
Loading ...
Loading ...