Loading ...
Loading ...
Loading ...
- 24 -
D. Connect & Place Electrodes
Once the parameters are set, connect electrodes before starting
treatment. Take the electrodes out of the sealed package. Connect
both pins of each lead wire to the pigtail of an electrode (one electrode
will not work). Make sure none of the metal pin connector is visible.
Place electrodes on or around the treatment area, ensure electrodes
are completely attached and at least 2” apart but no more than 6”
apart per channel.
E. Start Treatment
After all parameters are entered, to turn on the stimulation, press
under the corresponding channel at the top of the device being used
for therapy, until a comfortable stimulation level is reached. Repeat this
for each channel being used. Once the channel is started, the timer will
count down.
WARNING
1) Should an emergency occur and the device needs to be shut
off immediately, press the power button and the device will
completely power OFF and stop all stimulation.
2) DO NOT remove electrodes from treatment area until the
device is turned off.
Loading ...
Loading ...
Loading ...