Loading ...
Loading ...
Loading ...
- 22 -
C. Turn on Device
Once the panel is open, press the power button. The device will beep
and the LCD screen will show a display of numbers.
D. Select Waveform/Mode
To choose which waveform and mode to use, press until the desired
selection is displayed on the screen. There are 5 TENS modes
(B, N, M, SD1, SD2) and 3 EMS Modes (C, S, A) to choose from.
5.3 To Set TENS parameters
A. Set Pulse Width
Press button and the number for “Width” on the LCD screen will
ash. To change the default number, press or until the desired
Pulse Width number is displayed on the screen.
If the default Pulse Width is the desired number and no change is
needed, press to move on to the next parameter.
Loading ...
Loading ...
Loading ...