Loading ...
Loading ...
Loading ...
Use VLANS for Traffic Segmentation
34
NETGEAR ProSAFE Plus Configuration Utility
The previous figure is an example. Your switch might provide more or less ports.
7. Select one or more ports.
8. Enter the PVID.
You can enter a PVID only for a VLAN that already exists.
IMPORTANT:
Do not remove all ports from PVID 1, which is the management
PVID. If you remove all ports from PVID 1, you cannot access the
switch for management. In such a situation, to recover access to
the switch, you must reset the switch to factory defaults settings.
9. Click the APPLY button.
Your settings are saved.
Loading ...
Loading ...
Loading ...