Loading ...
Loading ...
Loading ...
Use VLANS for Traffic Segmentation
26
NETGEAR ProSAFE Plus Configuration Utility
The Switch Status page displays.
6. Select VLAN.
The Basic Port-Based VLAN page displays.
7. If this is the first time that you are accessing the Basic Port-based VLAN Status page or if
you are changing the VLAN assignment method, select the Enable radio button and
continue with Step 8.
Otherwise, see Step 9.
A pop-up window opens, informing you that the current VLAN settings will be lost.
8. Click the Yes button.
The pop-up window closes and the Basic Port-based VLAN Group table displays.
The previous figure is an example. Your switch might provide more or less ports.
9. Under each port to be added to a VLAN, enter the VLAN ID of the VLAN.
You can enter a VLAN ID from 1 to the maximum number of ports that your switch
supports. If all the VLANs share an uplink to the Internet or servers, enter all in the VLAN
ID field for the port that you want to use for the uplink.
Note: If ports are members of the same LAG, you must assign them to the same
VLAN.
10. Click the APPLY button.
Your settings are saved.
Loading ...
Loading ...
Loading ...