Loading ...
Loading ...
Loading ...
Optimize Performance With Quality of Service
21
NETGEAR ProSAFE Plus Configuration Utility
The Switch Selection page displays a list of Web Managed (Plus) switches that it
discovers on the local network.
3. Select the switch.
If you do not see the switch, click the REFRESH button.
4. Click the APPLY button.
You are asked to enter the password for the switch.
5. Enter the switch’s password in the password field.
The switch’s default password is password.
The Switch Status page displays.
6. Select QoS > Rate Limit.
The previous figure is an example. Your switch might provide more or less ports.
7. Select one or more ports.
8. Set the ingress (incoming) and egress (outgoing) traffic rates by doing the following:
a. Select one or more ports.
b. In the Ingress Rate menu, select the maximum rate.
The rate that you can set depends on the switch model. By default, no limit is set.
c. In the Egress Rate menu, select the maximum rate.
The rate that you can set depends on the switch model. By default, no limit is set.
d. Click the APPLY button.
Your settings are saved.
9. To set different rates for one or more other ports, repeat Step 8.
Loading ...
Loading ...
Loading ...