Loading ...
Loading ...
Loading ...
Manage Network Settings
15
NETGEAR ProSAFE Plus Configuration Utility
• GSS116E (all)
• GS116E (v2 or newer)
• JGS516PE (all)
• JGS524Ev1 (v1.00.15 or newer)
• JGS524Ev2 (all)
• JGS524PE (all)
• XS708E (all)
• XS716E (all)
Note: The switch does not support IEEE 802.3ad Link Aggregation or Link
Aggregation Control Protocol (LACP) groups. The switch supports
manual static LAGs only.
You must set up LAG membership before you can enable LAGs.
To specify LAG membership and enable a LAG:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
2. Launch the ProSAFE Plus Utility using the desktop icon or tile.
The Switch Selection page displays a list of Web Managed (Plus) switches that it
discovers on the local network.
3. Select the switch.
If you do not see the switch, click the REFRESH button.
4. Click the APPLY button.
You are asked to enter the password for the switch.
5. Enter the switch’s password in the password field.
The switch’s default password is password.
The Switch Status page displays.
6. Select System > LAG > LAG Membership.
The previous figure is an example. Your switch might provide a larger number of ports.
Loading ...
Loading ...
Loading ...