Loading ...
Loading ...
Loading ...
Operation
43
Dispenser module
In addition to the internal dispensing systems, up to two additional
external dispensing systems (dispenser modules) can be connected
for dispensing liquid process chemicals.
Suitable products are available from Miele Professional.
For more information on Miele dispenser modules, please contact
your Miele dealer or Miele Technical Service.
Labeling of the
suction wands
Liquid process chemicals from external containers are dispensed by
suction wands. Color coding the suction wands can be helpful for
correct dispensing.
Specific types of soiling may require different combinations of
detergents and additives. Miele Technical Service will be able to
advise you.
Connecting
dispenser
modules
The dispenser module comes with a separate installation manual.
Power supply connection for DOS1, detergent.
Power supply connection for DOS4, rinse aid.
Connections for dispensing hoses.
Before fitting the dispenser module, compare the connection
data (voltage and frequency) on the data plate with that on the data
plate of your machine. If the data does not match, the module
could sustain damage. If in any doubt, consult a qualified
electrician.
Connect the module to the machine's power supply.
To connect the dispensing hose, release the hose clip on a free
connector and remove the safety cap.
Push the dispensing hose onto the connector and secure it with a
hose clip.
Unused connectors must be blanked off with safety caps to
prevent the leakage of wash water.
Loading ...
Loading ...
Loading ...