Loading ...
Loading ...
Loading ...
Frequently asked questions
104
Cleaning the water intake filter
A filter is incorporated in the screw connection of the water intake
valve. The filter must be cleaned when dirty; otherwise, insufficient
water will flow into the wash cabinet.
The plastic housing of the water connection contains an
electrical component.
The housing must not be dipped in water.
Recommendation
If your water supply contains a large number of insoluble substances,
we recommend fitting a large-area filter in the connection between
the water supply valve and the water intake hose threaded union.
This filter can be purchased from your Miele dealer or from Miele
Service.
To clean the filter:
Disconnect the dishwasher from the power supply.
Switch off at the electrical socket and withdraw the plug.
Close the water supply.
Unscrew the water intake valve.
Take the seal ring out of the screw connection.
Withdraw the filter using pointed pliers and rinse clean under
running water.
Put the filter and seal back into place. Make sure they are fitted
correctly.
Reconnect the water intake valve to the faucet, making sure it goes
on correctly and is not cross-threaded.
Turn on the water supply.
If water leaks out, the screw connection may not be connected
securely or it may have been screwed on at an angle.
Unscrew and reconnect the water intake valve correctly.
Loading ...
Loading ...
Loading ...