Loading ...
Loading ...
Loading ...
Plumbing
*INSTALLATION*
117
Connection to the drainage system
- The dishwasher drain contains a built-in non-return valve which
prevents dirty water from flowing back into the dishwasher via the
drain hose.
- Ideally, the dishwasher should be connected to a separate on-site
drainage system. If a separate connection is not available, we
recommend connecting the dishwasher to a dual-chamber trap.
The on-site connection must be positioned between 12“ and
40” (0.3m and 1m) above the bottom edge of the dishwasher. If
the connection is lower than the minimum height, the drain hose
must be bent to maintain a height of 12“ (0.3m).
- The dishwasher is equipped with a 59“ (1.5-m) long flexible drain
hose (clear width of 7/8” (22mm)). Clamps for connecting the hose
are included with the dishwasher.
- Do not shorten the drain hose! The hose can be extended by a
connecting piece and an additional hose. The length of the
drainage line may not exceed 13' (4m).
- The drainage system must be able to handle a discharge rate of at
least 4.2g/min (16l/min).
Make sure that there are no kinks in the hose, and that it is not
crushed or stretched.
Please also refer to the accompanying installation diagram!
Loading ...
Loading ...
Loading ...