Loading ...
Loading ...
Loading ...
LIGHT REPLACEMENT
COOKTOP LIGHT
When replacing the cooktop light, make sure that you are
wearing gloves to avoid injury from the heat of the lamp.
1. Unplug the oven or turn off the power at the main power
supply.
2. Remove the screw from the light cover and lower the cover
until it stops.
3. Remove the screw on center of the LED Light secured to
the cover and pull out terminal.
4. Replace with 1.0-watt LED light available from your
authorized dealer and secure with screw.
5. Replace the light cover and mounting screw.
6. Turn the power back on at the main power supply.
TO REMOVE GREASE FILTER
To remove the grease lter holder, pull the tab toward the front
of the oven. Repeat for the other grease lter holder.
To remove the grease lter from the holder, pull using the
"nger hold" to assist as shown in below image.
PULL
FINGER HOLD
TO CLEAN GREASE FILTER
To clean grease lters, soak and then agitate lter in solution
of hot water and detergent. Do not use ammonia or ammonia
products because they will darken the metal. Light brushing
can be used to remove embedded dirt. Rinse, shake and
remove moisture before replacing.
TO REPLACE GREASE FILTER
To replace the grease lter, slide the grease lter into the
grease lter holder. Insert the grease lter holder into the
designated area of the bottom of the oven. Repeat for the
other grease lter.
CARE AND CLEANING
22E
Loading ...
Loading ...
Loading ...