Loading ...
Loading ...
Loading ...
CP4 STAGE/CP40 STAGE Owner’s Manual 41
Quick Start Guide
7 Select a destination for the Performance
using the Data Dial, and then press the
[ENTER] button.
8 Press the [+1/YES] button to load the data or
the [-1/NO] button to cancel the process.
If you pressed the [+1/YES] button, the data will be
loaded. To cancel loading, press the [EXIT] button
while the “Now loading...” message is displayed. If
you pressed the [-1/NO] button, no data will be
loaded and the instrument will return to the previous
screen.
9 Press the [EXIT] button the required number
of times to exit the File area.
Configuring Utility Settings
for the Overall System
Accessed by pressing the [UTILITY] button, the Utility
area can be used to set parameters that affect the entire
instrument.
Setting the master compressor
The master compressor is an effect applied just before
the stage piano’s sound is output in order to compress
high volumes and smooth out differences in loudness.
Using the following procedure, you can configure the
master compressor to suit the environment in which the
stage piano is played.
1 Press the [UTILITY] button.
The Utility menu will be displayed.
2 Use the [u] and [d] buttons to select
04: MasterComp, and then press the [ENTER]
button.
The master compressor setting screen will be
displayed.
3 Select a preset* for the master compressor
using the Data Dial. (*: Each preset
configures all parameters to suit a specific
need.)
NOTE While each preset configures all parameters to suit a
specific need, you can adjust these parameters if
necessary. To do so, press the [d] button to move to the
screen’s other panes.
4 Press the [STORE] button.
All Utility settings will be stored in the stage piano’s
memory.
Are you
[NO]
sure?
/[YES]
UTILITY
D01:General
E
UTILITY
MasterComp
Preset E
R Basic D
UTILITY
MasterComp
Preset E
R Maximizer D
Loading ...
Loading ...
Loading ...