Loading ...
Loading ...
Loading ...
26 CP4 STAGE/CP40 STAGE Owner’s Manual
Quick Start Guide
3 To change the split point, hold down the
[SPLIT] button and press the key at which
you wish to split the keyboard.
NOTE When you set the split point directly using a key as
described above, a message confirming the new
setting will be briefly displayed on-screen. You can also
change the split point using the SplitPnt parameter on
the General screen from the Performance Common Edit
area. (Refer to the Reference Manual (pdf) for details on
parameters.)
Balancing the volumes of split
Voices
If necessary, you can use the following procedure to
adjust the individual volumes of the MAIN and SPLIT
Parts:
1 Press the [SLIDER FUNCTION] button on the
left of the control panel as many times as
required to turn on the VOLUME light to its
left.
2 As you play the keyboard, adjust each Part’s
volume as appropriate by moving the slider
underneath its Part button.
Move the slider up to increase the volume and vice-
versa.
Changing the MAIN Part volume
(CP4 STAGE)
Changing the SPLIT Part volume
(CP40 STAGE)
NOTE Each Part has its own slider. On the CP40 STAGE, the
slider on the left corresponds to the SPLIT/LAYER Part
and also changes the setting when that Part is being
used as a LAYER Part.
Removing Voice splitting
To remove a split Voice, press the [SPLIT] button once
again. The button’s light will go out and the MAIN Part’s
Voice will be output when you play any key.
+
Split point
Hold
1
2
VOLUME light turns on
Move the MAIN Part’s slider.
Tip
Adjusting the pitch of each Part
You can use the following procedure to adjust the
pitch of any Part:
1 Select the Part by pressing its Part button
with the [PART SELECT] button held down.
2 Press the [EDIT] button.
3 On the Edit menu, use the [d] and [u]
buttons to select 02: Part, and then press
the [ENTER] button.
4 Select 01: Play Mode using the [u] button,
and then press the [ENTER] button.
5 Use the [d] and [u] buttons to display the
NoteShft (Note Shift) parameter, and then
change its setting.
6 Press the [EXIT] button to return to the
previous screen.
1
2
VOLUME light turns on
Move the SPLIT Part’s slider.
Loading ...
Loading ...
Loading ...