Loading ...
Loading ...
Loading ...
99
En
Useful Remote Control Features
14
Manufacturing Reset
All learned and preset codes can be returned to the factory
defaults regardless of the mode.
1 Press EDIT/LEARN and TV a at the same time. The Mode
switch setting is ignored.
• The LED indicator flashes and the remote control unit
enters the Manufacturing Reset mode.
2 Press D (yellow) to reset the remote control.
• The manufacturing reset is complete. The LED flashes for
one second then the remote control unit returns to normal
operation.
Note
• To exit the Edit mode before it is complete, press EDIT/LEARN
again.
•If the Mode switch selection is changed when in the Edit
mode, the Edit session is canceled.
• If no operation is performed within one minute, the Edit
session is canceled.
• When you enter an unlisted code, the LED flashes repeatedly.
• If the tables on pages 100 to 104 do not include your device’s
manufacturer or the remote control does not work, use the
Learn mode.
• The initial mode is “PIONEER”.
• When using any of the receiver buttons (a, INPUT, or VOL +/
–) to cancel the Learn mode, follow the procedure with the
Mode switch set to “TV”. You cannot cancel the mode
otherwise.
• You may not be able to partially or entirely control some
equipment in the tables.
PRO150FD.book Page 99 Tuesday, June 12, 2007 12:37 PM
Loading ...
Loading ...
Loading ...