PRO-110FD User Manual

Loading ...

Enjoying through External Equipment

Using HDMI Input

The INPUT 4, INPUT 5, INPUT 6, INPUT 7 terminals are HDMI

terminals to which digital video and audio signals can be input.

To use the HDMI terminal, specify the types of video and audio

signals to be received from the connected equipment. For the

types of these signals, see the operation manual that came with

the connected equipment.

Before starting the menu, press INPUT 4, INPUT 5, INPUT 6 or

INPUT 7 on the remote control unit or press INPUT on the plasma

display to select “INPUT 4”, “INPUT 5”, “INPUT 6” or “INPUT 7”.

For audio, the system supports the following:

• Linear PCM (STEREO 2ch)

• Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz

HDMI Control supported

The plasma display supports the HDMI Control functions. By

connecting devices that support the HDMI Control functions to

the plasma display, you can control the connected device(s) from

the plasma display or remote control unit of the plasma display.

See Using the HDMI Control on Chapter 13.

Deep Color supported

Deep Color means the color depth that describes the number of

bits used to represent the color of a single pixel in a bitmapped

image. Besides the conventional RGB/YCbCr16 bit/20 bit/24 bit

signals, the plasma display also supports RGB/YCbCr30 bit/36 bit

signals. This enables finer, minute color reproduction when a

device that supports Deep Color signals is connected to the

plasma display. When Deep Color signals are received, the color

depth appears on the channel display.

Note

• It may take a short while until the image is displayed,

depending on the equipment connected.

• Make sure to use an HDMI compliant cable.

• When inputting 1080p signals, we recommend you use an

HDMI cable that supports HDMI Category 2.

• When connecting a PC to the HDMI terminal, use the HDMI

compliant PC or video card.

• When connecting a PC to the HDMI terminal using a DVI

output terminal, the plasma display may not display properly. If

that is the case, consult with your PC manufacturer.

• PC picture and/or sound may not be displayed or heard

properly depending on the PC used.

• This plasma display is HDMI compatible. However, depending

on the type of the connected source component, it may exhibit

irregularities with this plasma display. Please consult the

component manual or contact the component manufacturer

for support.

Connecting HDMI equipment

When using the INPUT 4 terminal:

When using the INPUT 7 terminal:

Video signals supported

720 (1440) x [email protected] Hz/60 Hz

720 x 480p@59.94 Hz/60 Hz

1280 x 720p@59.94 Hz/60 Hz

1920 x 1080i@59.94 Hz/60 Hz

1920 x 1080p@24 Hz

1920 x 1080p@60 Hz

PC signals supported

640 x 480 (VGA) 60 Hz

800 x 600 (SVGA) 60 Hz

1024 x 768 (XGA) 60 Hz

1360 x 768 (Wide - XGA) 60 Hz

1280 x 1024 (SXGA) 60 Hz

Rear view

HDMI equipment

HDMI compliant

cable (HDMI cable

having the HDMI

mark)

Audio cable

(commercially available)

Make this connection

when inputting analog

audio signals.

Viewed from below of

the plasma display