Loading ...
Loading ...
Loading ...
3. Pull the sensor out of the cover, arrow, and
set it down on the inside side trim.
4. Release the second screw, arrow, using the
hex key to unlock the convertible top.
5. Take out the screw.
6. Lift the side frame slightly, arrow 1, and pull
the sensor and cable forward out of the
guide.
7. Pivot the cable out sideways, arrow 2.
When setting it down, ensure that the cable
is not pinched.
8. Unlock the second side frame.
Closing the convertible top
1. Hold on to the convertible top on the re‐
spective side frames with both hands.
2. Lift it out on both sides and pivot it forward
onto the cowl.
3. In the vehicle, pry out the cover in the mid‐
dle of the roof using the screwdriver.
Closing the sliding sunroof
1.
Insert the hex key into the opening de‐
signed for this purpose in the middle of the
roof and press upward, arrow 1.
2. Turn the hex key in the direction of arrow 2.
3. Open the two locks and take off the locking
pieces.
Seite 37
Opening and closing
CONTROLS
37
Online Edition for Part no. 01 40 2 961 029 - II/15
Loading ...
Loading ...
Loading ...