Loading ...
Loading ...
Loading ...
Driving
Vehicle features and
options
This chapter describes all standard, country-spe‐
cific and optional features offered with the series.
It also describes features that are not necessarily
available in your vehicle, e. g., due to the selected
options or country versions. This also applies to
safety-related functions and systems. When us‐
ing these functions and systems, the applicable
laws and regulations must be observed.
Start/Stop button
Concept
Pressing the Start/Stop button
switches the ignition on or off and
starts the engine.
The engine starts with the brake
pedal pressed when you press
the Start/Stop button.
Ignition on
Press the Start/Stop button, and do not press on
the brake pedal at the same time.
All vehicle systems are ready for operation.
Most of the indicator/warning lights in the instru‐
ment cluster light up for a varied length of time.
To save battery power when the engine is off,
switch off the ignition and any unnecessary elec‐
tronic systems/power consumers.
Ignition off
Press the Start/Stop button again without step‐
ping on the brake.
All indicator lights in the instrument cluster go
out.
To save battery power when the engine is off,
switch off the ignition and any unnecessary elec‐
tronic systems/power consumers.
Safety measures
When switching off the ignition, the transmission
position P is engaged automatically if the selec‐
tor lever position D or R is engaged.
The ignition is switched off automatically in the
following situations while the vehicle is stationary
and the engine is off:
▷ When locking the vehicle, and when the low
beams are switched on.
▷ Shortly before the battery is discharged com‐
pletely, so that the engine can still be started.
▷ When opening or closing the driver door, if
the driver's safety belt is unbuckled and the
low beams are switched off.
▷ While the driver's safety belt is unbuckled
with driver's door open and low beams off.
▷ When the front doors are opened if there is
no other person sitting in the front seats.
The low beams switch to parking lights after
some minutes of no use.
Radio-ready state
General information
In the radio-ready state, certain power consum‐
ers remain ready for operation.
Activating
With the engine running, press the Start/Stop
button.
If the engine is not running and the ignition is
switched on: the system automatically activates
radio-ready state when the door is opened if the
lights are switched off or the daytime running
lights are switched on.
Seite 92
CONTROLS
Driving
92
Online Edition for Part no. 01402896586 - X/18
Loading ...
Loading ...
Loading ...