Loading ...
Loading ...
Loading ...
Warning with braking function
Display
If a collision with a person detected in this way is
imminent, a warning symbol appears on the in‐
strument cluster and in the Head-up Display.
The red symbol is displayed and a signal
sounds.
Intervene immediately by braking or make an
evasive maneuver.
Braking intervention
The warning prompts the driver to react. During
a warning, the maximum braking force is used.
Prerequisite for the brake booster is sufficiently
quick and hard stepping on the brake pedal. If
there is a risk of collision, the system may assist
with braking. When the vehicle is traveling at a
low speed, the vehicle may come to a complete
stop.
The braking intervention occurs only if vehicle
stability has not been restricted, for instance by
deactivating the DSC Dynamic Stability Control.
The driver may cancel the braking intervention
by stepping on the accelerator pedal or by ac‐
tively moving the steering wheel.
Object detection can be restricted. Follow the
limitations of the detection range and functional
limitations.
System limits
Safety information
WARNING
The system can react not at all, too late, incor‐
rectly, or without justification due to the system
limits. There is a risk of accidents or risk of
damage to property. Follow the information re‐
garding the system limits and actively intervene
if needed.
Detection range
The detection potential of the camera is limited.
Thus, a warning might not be issued or be is‐
sued late.
E.g., the following situations may not be de‐
tected:
▷ Partially covered pedestrians.
▷ Pedestrians that are not detected as such be‐
cause of the viewing angle or contour.
▷ Pedestrians outside of the detection range.
▷ Pedestrians having a body size less than
32 in/80 cm.
Functional limitations
The system may not be fully functional or may
not be available in the following situations:
▷ In heavy fog, wet conditions, or snowfall.
▷ In tight curves.
▷ If the driving stability control systems are de‐
activated, for instance DSC OFF.
▷ If the field of view of the camera or the wind‐
shield are dirty or covered.
▷ Up to 10 seconds after the start of the engine
via the Start/Stop button.
▷ During calibration of the camera immediately
after vehicle delivery.
▷ If there are constant blinding effects because
of oncoming light, for instance from the sun
low in the sky.
▷ When it is dark outside.
Night Vision with
Pedestrian and Animal
Detection
Concept
Night Vision with pedestrian and animal detec‐
tion is a night vision system.
Seite 151
Safety
CONTROLS
151
Online Edition for Part no. 01402896586 - X/18
Loading ...
Loading ...
Loading ...