Loading ...
Loading ...
Loading ...
Height
General information
The height of the outer head restraints can be
adjusted.
Settings
▷ To lower: press the button, arrow 1, and push
the head restraint down.
▷ To raise: push the head restraint up.
After setting the height, move the head restraint
up or down slightly, making sure it engages
properly.
Removing
The outer head restraints can be removed. Only
remove the head restraint if no one will be sitting
in the seat in question.
1.
Raise the head restraint up against the resist‐
ance.
2. Press the button, arrow 1, and pull the head
restraint out completely.
Installing
Proceed in the reverse order to install the head
restraint.
Memory function
Concept
The following settings can be stored and, if nec‐
essary, retrieved using the memory function:
▷ Seat position.
▷ Exterior mirror position.
▷ Steering wheel position.
▷ Height of the Head-up Display.
General information
Two memory locations with different settings
can be set for each driver profile, refer to
page 66.
Depending on the vehicle equipment, the follow‐
ing settings are not stored:
▷ Backrest width.
▷ Lumbar support.
Safety information
WARNING
Using the memory function while driving can
lead to unexpected seat or steering wheel
movements. Vehicle control could be lost.
There is a risk of an accident. Only retrieve the
memory function when the vehicle is stationary.
WARNING
There is a risk of jamming when moving the
seats. There is a risk of injury or risk of damage
to property. Make sure that the area of move‐
ment of the seat is clear prior to any adjust‐
ment.
Seite 83
Seats, mirrors, and steering wheel
CONTROLS
83
Online Edition for Part no. 01402896586 - X/18
Loading ...
Loading ...
Loading ...