User Manual - Page 69

For 2019 BMW X6 M.

Loading ...
Loading ...
Loading ...
Automatic locking
Via iDrive:
1. "Settings"
2. "Doors/key"
3. Select the desired function:
"Lock if no door is opened"
The vehicle locks automatically after a
short period of time if no door is opened
after unlocking.
"Lock after start driving"
The vehicle locks automatically after you
drive off.
Adjusting the last seat, mirror,
and steering wheel position
Via iDrive:
1.
"Settings"
2. "Doors/key"
3. "Last seat position autom."
When the vehicle is unlocked, the driver's seat,
exterior mirrors and steering wheel resume their
last set positions.
Alarm system
General information
When the vehicle is locked, the vehicle alarm
system reacts to the following changes:
Unauthorized opening of a door, the hood or
the tailgate.
Movements in the car's interior.
Changes in the vehicle tilt, e. g., during at‐
tempts at stealing a wheel or when towing
the vehicle.
Disconnected battery voltage.
Improper use of the socket for Onboard Diag‐
nosis.
Locking the vehicle while a device is con‐
nected to the socket for the OBD Onboard-
Diagnosis. Socket for the OBD Onboard Di‐
agnosis, refer to page 261.
The alarm system signals the following changes
visually and acoustically:
Acoustic alarm:
Depending on local regulations, the acoustic
alarm may be suppressed.
Visual alarm:
By flashing the exterior lighting.
Switching on/off
When you lock and unlock the vehicle with the
remote control or Comfort Access, the alarm
system will also switch on or off at the same
time.
Opening the doors with the alarm
system switched on
The alarm system is triggered when a door is
opened if the door was unlocked using the
integrated key in the door lock.
Switching off the alarm, refer to page 70.
Opening the tailgate with the
alarm system switched on
The tailgate can be opened even when the alarm
system is switched on.
After the tailgate is closed, it is locked and moni‐
tored again provided the doors are locked. The
hazard warning system flashes once.
Panic mode
You can trigger the alarm system if you find your‐
self in a dangerous situation.
Press the button on the remote con‐
trol and hold for at least 3 seconds.
Briefly press the button on the remote control
three times in succession.
To switch off the alarm: press any button.
Seite 69
Opening and closing
CONTROLS
69
Online Edition for Part no. 01402896586 - X/18
Loading ...
Loading ...
Loading ...