Loading ...
Loading ...
Loading ...
2. Pull the connection hose fully out of the com‐
pressor housing. Do not kink the hose.
3. Screw the connection hose onto the connec‐
tor of the sealant container.
4. Insert the sealant container on the compres‐
sor housing in an upright position.
5. Remove the valve cap from the tire valve and
screw the filling hose of the sealant container
onto the tire valve of the nonworking wheel.
6. With the compressor switched off, insert the
plug into the power socket inside the vehicle.
7. With the ignition switched on or the engine
running, switch on the compressor.
Let the compressor run for max. 10 minutes to fill
the tire with sealant and achieve a tire inflation
pressure of approx. 2.5 bar.
While the tire is being filled with sealant, the tire
inflation pressure may sporadically reach approx.
5 bar. Do not switch off the compressor at this
point.
Seite 243
Wheels and tires
MOBILITY
243
Online Edition for Part no. 01402896586 - X/18
Loading ...
Loading ...
Loading ...