Loading ...
Loading ...
Loading ...
Parking brake
Setting
Pull the switch.
The LED and indicator light light up.
Releasing
With the ignition switched on:
Press the switch while pressing on the
brake pedal.
The LED and indicator light go out.
The parking brake is released.
Parking
The parking brake is automatically set if the en‐
gine is switched off while the vehicle is being
held by Automatic Hold.
M Steptronic Sport transmission
Engaging the transmission position
Pull or push the selector lever in the correspond‐
ing direction.
▷ R: reverse gear.
▷ N: neutral.
▷ Center position, forward position.
▷ +: manual upshifting.
▷ -: manual downshifting.
▷ D/S: switch between drive mode and sequen‐
tial mode.
Engaging a selector lever position
Press on the brake pedal and pull or push the se‐
lector lever in the corresponding direction.
Reverse R
Select only when the vehicle is stationary.
N is Neutral
Use in automatic vehicle washes, for instance.
The vehicle can then roll.
S is Sequential mode
Use the shift paddles or the selector lever to up‐
shift or downshift without letting off the gas.
D is Drive mode
In Drive mode, all forward gears are automatically
changed.
P Park
The drive wheels are blocked.
P is engaged automatically:
▷ After the engine is switched off, if the vehicle
is in radio-ready state or if the ignition is
switched off and if position R or D is set.
▷ With the ignition is off, if position N is set.
▷ If the safety belt is unbuckled, the driver's
door is opened, and the brake is released
while the vehicle is stationary and position R
or D is set.
Seite 24
QUICK REFERENCE
Your BMW at a glance
24
Online Edition for Part no. 01402896586 - X/18
Loading ...
Loading ...
Loading ...