Loading ...
Loading ...
Loading ...
If a tire inflation pressure of 2 bar is not reached:
1. Switch off the compressor.
2. Pull the connector out of the power socket
inside the vehicle.
3. Unscrew the filling hose from the tire valve.
4. Drive 33 ft/10 m forward and back to distribā
ute the sealant in the tire.
5. Inflate the tire again using the compressor.
If a tire inflation pressure of 2 bar cannot be
reached, contact your dealerās service center
or another qualified service center or repair
shop.
Stowing the Mobility System
1.
Unscrew the filling hose of the sealant conā
tainer from the tire valve.
2. Pull the compressor connector out of the
socket inside the vehicle.
3. Unscrew the connection hose of the comā
pressor from the sealant container.
4. Connect the filling hose of the sealant conā
tainer previously connected to the tire valve
with the available connector on the sealant
container.
This prevents leftover sealant escaping from
the sealant container.
5. Wrap and store the sealant container in suitaā
ble material to avoid dirtying the cargo area.
6. Stow the Mobility System back in the cargo
area.
Distributing the sealant
Immediately drive approx. 5 miles/10 km to enā
sure that the sealant is evenly distributed in the
tire.
Do not exceed the permissible maximum speed
of 50 mph/80 km/h.
If possible, do not drive at speeds less than
12 mph/20 km/h.
Correcting the tire inflation
pressure
1. Stop at a suitable location.
2. Screw the connection hose of the compresā
sor directly onto the tire valve stem.
3. Insert the connector into the power socket inā
side the vehicle.
4. Correct the tire inflation pressure to 2.5 bar.
ā· Increase tire inflation pressure: with the igā
nition switched on or the engine running,
switch on the compressor.
ā· Reduce tire inflation pressure: press the
button on the compressor.
Continuing the trip
Do not exceed the maximum permissible speed
of 50 mph/80 km/h.
Reinitialize the run-flat tires.
Reset the Tire Pressure Monitor TPM.
Replace the nonworking tire and the sealant conā
tainer of the Mobility System at the next opportuā
nity.
Snow chains
Safety information
WARNING
With the mounting of snow chains on unsuitaā
ble tires, the snow chains can come into conā
tact with vehicle parts. There is a risk of acciā
dents or risk of damage to property. Only
mount snow chains on tires that are designated
by their manufacturer as suitable for the use of
snow chains.
Seite 244
MOBILITY
Wheels and tires
244
Online Edition for Part no. 01402896586 - X/18
Loading ...
Loading ...
Loading ...