Loading ...
Loading ...
Loading ...
7
Adding a Door Station
If you have already integrated the door station, you can skip this section and
continue with the section Adding Door Stations and Cameras to MxDisplay.
Setting up the door station follows the steps outlined in Chapters 2 to 4 of the
"T25 System Manual Part 2". The T25 System Manual is available at
www.mobotix.com > Support > Manuals > IP Video Door Station.
Overview over the most important steps:
1. Power and Network
Make sure that all devices are connected to the network and that the power
supply has been established.
2. Execute Auto Conguration
Carry out the auto conguration at the door station (see Section 2.1.3 in
the "T25 System Manual Part 2"). When using several door stations, choose
one door station as a master and then carry out the auto conguration on
that door station. The auto conguration is completed by entering the
Super PIN at the access modules (KeypadRFID or BellRFID).
3. Congure Access Modules
The access modules of the system will now be set up one by one. This
includes training the RFID cards, entering the contact/people/PIN numbers
(if applicable) and conguring the bell buttons on the BellRFID modules
(see sections 2.2 and 2.3 in the "T25 System Manual Part 2").
Loading ...
Loading ...
Loading ...