Loading ...
Loading ...
Loading ...
Table 5-63 Email parameters
Parameter Description
Enable
Enable the email function.
There might be risk of sending data to specied email address
after it is enabled.
SMTP Server Enter the address of SMTP server of sender’s email account.
Port
Enter the port value of SMTP server. The default value is 25. You
can enter the value according to your actual need.
Username
Enter the username and password of sender’s email account.
Password
Anonymous If enable the anonymity function, you can login as anonymity.
Receiver
In the Receiver list, select the number of receiver that you want
to receive the notication. The Device supports up to three mail
receivers.
Email Address Enter the email address of mail receiver(s).
Sender
Enter the sender’s email address. It supports maximum three
senders separated by comma.
Subject
Enter the email subject.
Supports Chinese, English and numerals. It supports maximum 64
characters.
Attachment
Enable the attachment function. When there is an alarm event,
the system can attach snapshots as an attachment to the email.
3 Images
Enable the 3 Images function. The system captures 3 images as
attached images for the main text.
Interval The interval that the system sends every 3 image.
Encryption Type
Select the encryption type: NONE , SSL, or TLS.
For SMTP server, the default encryption type is TLS.
Sending Interval (sec.)
This is the interval that the system sends an email for the same
type of alarm event, which means, the system does not send an
email upon any alarm event.
This setting helps to avoid the large amount of emails caused by
frequent alarm events.
The value ranges from 0 to 3600. 0 means that there is no interval.
Health Mail
Enable the health test function. The system can send a test email
to check the connection.
Sending Interval (Min.)
This is the interval that the system sends a health test email.
The value ranges from 30 to 1440. 0 means that there is no
interval.
User's Manual
282
Loading ...
Loading ...
Loading ...