Loading ...
Loading ...
Loading ...
2. Click .
Figure 5-170 Intrusion rule
3. Congure the settings for the parameters of drawing rules.
Table 5-50 Intrusion parameters
Parameter Description
Name Enter the customized rule name.
Sensitivity
Congure the detection sensitivity.
The higher the value, the easier to trigger an alarm but
meanwhile the higher false alarm rate.
Action Set the intrusion action, including appear and crossing area.
Direction
Set the intrusion direction. You can select Enter , Exit, and
Both.
Target Filter
Click
and then select eective target. With Human and
Motor Vehicle selected by default, the system automatically
identies the person and motor vehicle appeared within the
monitoring range.
Eective Target
4. Drag to draw an area.
5. Click OK to save the settings.
Step 3 Click to set the actions to be triggered.
Step 4 Select the Enable checkbox, and then click Apply.
The intrusion detecting function is active. When the target enters and leaves the area, or
the target appears in the dened area, the system activates alarms.
User's Manual
231
Loading ...
Loading ...
Loading ...